Fittings

Flanges

Flanges

This is one  of the most common systems to join two different elements is a flanged joint. It allows not only to join two pipes, but to join these pipes to vessels, tanks, or to pipes made of different materials.

Flanges can be made of FRP, PVC, PP, PVDF, C-PVC, FEP and other kind of anticorrosive plastics. Their dimensions can be adjusted according to DIN, ANSI, JIS, AWWA standards or any other norm requested by our client.

 

90º Elbows

90º Elbows

90º elbows according to DIN 16966 standard, made of FRP, PVC, PP, PVDF, C-PVC, FEP and other kind of anticorrosive plastics. Usually, they are made with an equivalent radius of 1,5 times its diameter, but they can also be made with greater radius under request. Depending on their internal diameter, they can be made with continuous curvature or to segments (the elbow is made with several pieces of straight pipe joined in angle). 

 

 

45º Elbows

45º Elbows

45º elbows according to DIN 16966 standard, made of FRP, PVC, PP, PVDF, C-PVC, FEP and other kinds of anticorrosive plastics. Usually, they are made with an equivalent radius of 1,5 times its diameter, but they can also be made with greater radius under request. Depending on their internal diameter, they can be made with continuous curvature or to segments (the elbow is made with several pieces of straight pipe joined in angle). 

 

 

T's

T's

T’s with equal branches, made in FRP, PVC, PP, PVDF, C-PVC, FEP and other kinds of anticorrosive plastics according to DIN 16966 standard. Under request, we can also make T’s with different lengths than the standard, branches with a different angle than 90º or with different diameter than the main pipe. 

 

 

 

Reducers

Reducers

 

Concentric and eccentric reducers prepared for butt welding, made of FRP, PVC, PP, PVDF, C-PVC, FEP and other kinds of anticorrosive plastics, according to DIN 16966 standard or any other one under request. 

 

 

 

Loose flanges

Loose flanges

 

Rotating loose flanges, collars for use with stub ends, made of: GRP, Painted Steel, Galvanized Steel, Polypropylene or PVC, all under DIN, ANSI, JIS, AWWA, or as special request of each client.

 

 

 

Stub Ends

Stub Ends

This is one of the most commonly used binding systems. The stub ends are made ​​of GRP, PVC, PP, PVDF, C-PVC, FEP, plastics and corrosion, dimensionally under DIN, ANSI, JIS, AWWA, or as special request of each client. In addition to assembling the pipes to each other, also to allow the mechanical equipment, tanks and pipes of other materials. Unlike fixed flanges, this system allows the free orientation of valves, meters, flow meters, Scopes, Levels, Referrals, etc.

Aenor iqnet